SDI Permite - High Strength, Easy Carving Admix Amalgam 2 Spill

No Contact Delivery

No Return

DentGanga Delivered

No Warranty Available

SDI Permite - High Strength, Easy Carving Admix Amalgam 2 Spill

sold by Dental Avenue India Pvt Ltd_DentGanga

Estimate delivery time : 3 days

was 9,475.00

Now: ₹ 4,005.00Inclusive of GST.

Saving: ₹ 5,470.00

57.73% Off

About this Product

High Compressive Strength

Permite’s high compressive strength minimizes the risk of fracturing the restoration. High compressive strength ensures a tough and durable long-lasting restoration.

Product Description

Permite - High Strength, Easy Carving Admix Amalgam

1. Permite exhibits the best sealing qualities with no danger of excessive delayed expansion if accidentally contaminated with water-based fluids. Hence, it would seem prudent to select an alloy such as Permite for retrograde fillings. High strength, high polish ability, superior handling.

2. Permite – the non-gamma 2 admix alloy unsurpassed by any other.

Features

High Compressive Strength

Permite’s high compressive strength minimizes the risk of fracturing the restoration. High compressive strength ensures a tough and durable long lasting restoration.

Low Microleakage

The microleakage for Permite is essentially zero. Extensive microleakage has been related to increased post operative sensitivity.

Optimal handling characteristics

In the Dental Advisor Plus Permite received a 98% rating for consistency of mix, ease of loading, placement in preparations, condensability, burnish ability, quality of interproximal contact, carvability and setting characteristics. The resulting restorations are smooth and have excellent margin adaptation, especially after burnishing. All consultants said they would recommend Permite to their colleagues.

Not affected by moisture

Permite exhibits the best sealing qualities with no danger of excessive delayed expansion if accidentally contaminated with water-based fluids. Hence, it would seem prudent to select an alloy such as Permite for retrograde fillings.

Greater choice of setting times and larger choice of capsule sizes

The working and setting times allow large restorations to be condensed and carved without difficulty.

Technical Info

Composition: Ag 56%, Sn 27.9%, Cu 15.4%, In 0.5%, Zn 0.2%, Hg 47.9%
Alloy Particle: Spherical and Lathe Cut
Compressive strength @ 1 hour: 260MPa (37,700psi)
Compressive strength @ 24 hours: 500MPa (72,500psi)
Diametral tensile strength @ 1 hour: 28MPa (4,060psi)
Diametral tensile strength @ 24 hours: 54MPa (7,830psi)
Static creep @ 7 days: 0.2%
Dimensional change @ 24 hours: +4μm/cm

Instructions To Use

STEP 1: Isolate tooth.

STEP 2: Prepare cavity using standard technique for amalgam restoration.

Note: In cases where pulp protection is necessary, use a calcium hydroxide liner or glass ionomer cement.

STEP 3: Activate a capsule on a bench or hard surface until plunger is fully flushed with the body of the capsule.

STEP 4: Place activated capsule in a high speed multi-use triturator.

STEP 5: Carefully remove the triturated capsule from the triturator and gently tap the base on a bench or hard surface once.

STEP 6: Open the capsule by removing the base from the body to access the prepared amalgam.

Note: Freshly mixed amalgam should have a bright look and a plastic consistency.

STEP 7: Immediately insert amalgam into prepared cavity using a clean amalgam carrier employing standard amalgam condensation technique.

Note:

i. “If moisture is introduced into the dental amalgam before it has set, properties such as strength and corrosion resistance can be affected adversely. If the alloy contains zinc, such contamination can result in excessive expansion (delayed expansion). Use a dry field, whenever it is possible.

ii. Permite contains zinc in an alloyed form and not free zinc. It’s the free zinc which is very sensitive to moisture.

STEP 8: Remove any mercury rich amalgam from the surface that may develop during condensation.

STEP 9: Trimming and carving can begin after condensation using a sharp carver.

STEP 10: Light burnishing can be carried out after 24 hours to improve surface smoothness. Avoid over heating by ensuring adequate water cooling and low speed.

Technical Details

Brand	SDI
Manufacturer	SDI
SKU	DGIN23013908-15572
Item Model Number	DGIN23013908-15572

Shipping Details

Item Height	15.00 cm
Item Width	15.00 cm
Item Length	15.00 cm
Item Weight	200.00 gram

Frequently Asked Questions

Que: Do you have EMI options on heavy equipments or products?
Ans: Yes, EMI options are available. The minimum order amount varies across banks and same can be checked on payment page.

Que: Do you provide free shipping?
Ans: Yes, we provide free shipping through our membership plans. You can choose the plan on checkout page.

Que: Do you provide Cash on Delivery (COD)?
Ans: We do provide Cash On Delivery (COD) on Prime Service Products .

Que: Do you deliver at my location?
Ans: Yes, we deliver the products PAN India.

Que: What is the estimated delivery date?
Ans: It usually takes 5-7 working days to deliver the product at your doorstep.

Que: What are the terms and conditions for returning the product?
Ans: The product seal should not be broken and properly packed before returning and bill should be there with the product.

Que: What is the expiry for the material?
Ans: Our products have a minimum one-year expiration date. The expiry that is shorter than this is regarded as a short expiry and you can return the same within 7 days of delivery.

Que: If I return or cancel the order, when will I get the refund?
Ans: In case of returned order, refunds are processed within 2 working days of receiving the product back and same will be transferred to your bank account or credit card within 3-5 days. Please note that amount will be refunded to the same account / credit card / wallet from where you originally made the payment.

Que: What is the dispatch time for any order?
Ans: Our dealers may take 24-48 hours to dispatch any order.

Que: Is bulk quantity order eligible for free shipping?
Ans: You can avail the free delivery through our membership plan only.