General
Restroratives
Instrustments
Alginate 10+1 Free
Prime Services
Endodontics
Restoratives
Prosthodontics
Instruments
General dentistry
Oral Surgery
Dental Lab
Equipments
Covid Essential
Orthodontics
Periodontics
Paedodontics
Vatech Product Accessories
Implantology
Undergraduate Areas
Dental Hygiene
Sterilization
Dispenser
Laboratory
Lab - Equipment

Delivery

No Contact Delivery

return

7 Days Return

delivery

DentGanga Delivered

slide

No Warranty Available

DMG LuxaCore Z Smartmix Core Build Up Material

Estimate delivery time : 3 days

was 9,000.00

Now: ₹ 4,912.00Inclusive of GST.

Saving: ₹ 4,088.00

45.42% Off
1,000 Ganga Coins can be used
Privilege Members can use upto 2,000 coins

About this Product

  • Cuts remarkably like dentin
  • Exceptionally high compressive strength for enhanced stability
  • Patented nanotechnology prevents particle agglomeration
  • Better handling characteristics
  • Film thickness of precision cement
  • Perfect properties, even when used as a post cement
  • Smoother material with enhanced flow
  • More stable, firmer, easier to form
Product Description
LuxaCore Z-Dual from DMG America, the ultra-strong, ultra-reliable core build-up material created with zirconia.  Its combination of zirconia filler with DMG's patented nanotechnology means it significantly improves strength, flowability and physical properties - it's the ultimate in resin technology!  LuxaCore Z-Dual also works for your post cementing needs.  Available in Natural, Blue and Light Opaque shades.

SHADES AVAILABLE:
  • Natural (A3) : For optimal esthetic results
  • Blue: For distinguishing the core material from tooth structure
  • Light Opaque: For the perfect balance of contrast and esthetics.
Indications
  • All types of core build-up
  • Cementation of root posts
Contraindications
  • Do not use the material in cases of allergies to any of the components, in particular benzoyl peroxide, or in the event of contact allergies
  • Do not use the material with a single-bottle bond because an optimum adhesive bond is generally not assured with chemical or dual-cure materials
  • Do not use the material if a dry working environment is not possible
Compositions
  • Barium glass, pyrogenic silicic acid, nanofiller and zirconium dioxide in a Bis-GMA based matrix from dental resins. Filler content: 71 % by weight = 50 % by vol. (0.02 – 2.4 μm)
TECHNICAL DATA:
  • Working Time:1:30
  • Setting time in mouth:5:00
  • Flexural Modulus:9.3 MPa
  • Flexural Strength:150 MPa
  • Compression Strength: 380 Mpa
  • Water absorption:20 μg/mm3
Interactions
  • Materials containing eugenol may inhibit the polymerization of LuxaCore Z-Dual and lead to discoloration Air containing water and oil can inhibit the polymerization of LuxaCore Z-Dual at the contact surfaces.
Instructions for use
  • Light-curing units should have an output of 450 nm and should be checked regularly
  • The light intensity should be a minimum of 400 mW/cm2 Place the light as close as possible to the material.
Directions
  • Isolate the tooth prior to preparation using a rubber dam
  • Remove existing fillings and caries
  • If the bonding agent used requires an additional etching step then etch using the etching gel per the manufacturer’s instructions.

Please note: DMG recommends the use of the dual-cure adhesive system LuxaBondTotal Etch. In this case, it is essential to etch the affected enamel and dentine surfaces. Observe the manufacturer’s instructions. Caution! Unprotected pulp.  Prior to bonding in deep cavities in areas close to the pulp, provide protection by using a small quantity of calcium hydroxide and a thin layer of glass ionomer cement for example

  • Apply bonding agent in accordance with the manufacturer’s instructions
  • In order to simplify the application of LuxaCore Z-Dual, place a matrix around the prepared tooth and apply LuxaCore Z-Dual directly into the cavity. If a prefabricated core build-up form is used, apply LuxaCore Z-Dual directly into the core build-up form and place it on the prepared tooth. Please note: LuxaCore Z-Dual can be formed within the working time of 1:30 minutes using a standard composite instrument, e.g. a Heidemann spatula. In order to enhance processing, coat the Heidemann spatula with a bond as a separating medium
  • Leave LuxaCore Z-Dual to bond intraorally for approx. 5 minutes or expose to a suitable light-curing unit for a minimum of 40 seconds (maximum layer thickness≤ of 4 mm). In the case of thinner layers (≤ 2 mm) exposure to light for 20 seconds is sufficient. Please note: With chemical curing, low temperatures (e.g. when working in the area of the front teeth) lead to longer bonding times
  • If used, remove a matrix only once the material has hardened fully
  • Produce the preparation for the desired restoration form using standard preparation instruments
  • If a plastic temporary restoration is to be applied to the prepared tooth, isolate the preparation using a suitable separation medium (e.g. Vaseline).
Cementation of root posts
  • Carry out any preparation procedures necessary for root posts in accordance with the manufacturer’s instructions
  • Prepare the root canal in accordance with the requirements of the respective root post
  • If the bonding agent used requires an additional etching step then etch inside the canal using the etching gel per the manufacturer’s instructions. Please note: It is advisable to use the dual-cure adhesive system LuxaBond-Total Etch. In this case, it is essential to etch the affected enamel and dentine surfaces. Observe the manufacturer’s instructions
  • Apply bonding agent in accordance with the manufacturer’s instructions. If an adhesive system with a light-curing component is used, use a paper tip to remove any excess from the canal prior to the application of light. Otherwise, the lumen may be blocked
  • Apply LuxaCore Z-Dual to the canal lumen. When doing so keep the end of the tip constantly immersed in the material. If desired, it is additionally possible to coat the root post with LuxaCore Z-Dual. The LuxaCore Z-Dual working time is 1:30 minutes. Please note: When using LuxaBond-Total Etch, the working time of LuxaCore Z-Dual in the root canal is reduced to approx. 30 seconds due to the contact with the pre-bond. It is also possible that the working time may be reduced with other bonding agents. Observe the manufacturer’s instructions
  • Set the root post
  • Using a suitable lamp, apply light to the material for 20 seconds
  • Leave the material to harden for approx. 5:00 minutes. This guarantees complete curing, also in areas that cannot be reached by light. Please note: With LuxaCore Z-Dual it is possible to work on the coronal portion of the tooth as a core build-up. Due to the easy-flowing consistency, it is recommended that work be carried out using a matrix (see “Carry out core build-up” ).
Technical Details
Brand DMG
Manufacturer DMG
SKU DGIN220121-5656
Item Model Number DGIN220121-5656
Shipping Details
Item Height 12.00 cm
Item Width 3.00 cm
Item Length 8.00 cm
Item Weight 200.00 gram

Frequently Asked Questions

Que: Do you have EMI options on heavy equipments or products?
Ans: Yes, EMI options are available. The minimum order amount varies across banks and same can be checked on payment page.

Que: Do you provide free shipping?
Ans: Yes, we provide free shipping through our membership plans. You can choose the plan on checkout page.

Que: Do you provide Cash on Delivery (COD)?
Ans: We do not provide cash on delivery (COD). We have partnered with industries leading payment gateway for safe and secure transactions.

Que: Do you deliver at my location?
Ans: Yes, we deliver the products PAN India.

Que: What is the estimated delivery date?
Ans: It usually takes 5-7 working days to deliver the product at your doorstep.

Que: What are the terms and conditions for returning the product?
Ans: The product seal should not be broken and properly packed before returning and bill should be there with the product.

Que: What is the expiry for the material?
Ans: Our products have a minimum one-year expiration date. The expiry that is shorter than this is regarded as a short expiry and you can return the same within 7 days of delivery.

Que: If I return or cancel the order, when will I get the refund?
Ans: In case of returned order, refunds are processed within 2 working days of receiving the product back and same will be transferred to your bank account or credit card within 3-5 days. Please note that amount will be refunded to the same account / credit card / wallet from where you originally made the payment.

Que: What is the dispatch time for any order?
Ans: Our dealers may take 24-48 hours to dispatch any order.

Que: Is bulk quantity order eligible for free shipping?
Ans: You can avail the free delivery through our membership plan only.

Product is Out Of Stock

Any query? request callback

Drop your number and we will callback to answer your questions.

Top Products

Related Products

Filters:
Selected filters:
Sort By:
Brands:
Categories:

Search Results:

Choose your location
or enter an Indian pincode