D-Tech restore glass is Humid-Stable glass ionomer restorative cement suitable for the restoration of prepared teeth and restorations of classIII, V& limited Class I cavities. This glass ionomer cement (gic) is known for its aesthetic looks and can be used for core build up. D Tech Glass ionomer cements (GIC) are truly economical restorative cement.
Mixing Time 23°C - 30 second
Working time B 23°C - 2:00 min
Setting time B 23°C - 4:00 min
Shelf life - 2 years
Dispense powder and liquid onto the pad . Using a plastic spatula, divide the powder into 2 equal parts. Mix the first portion with all of the liquid for 10 seconds. Incorporate the remaining portion and mix the whole thoroughly for 15 - 20 sec. (total time within 30 seconds)
Prepare tooth using standard techniques. Extensive mechanical retention is not necessary. For pulp capping use calcium hydroxide paste.
Wash & Dry but DO NOT DESICCATE. D-Tech’s dentine conditioner is recommended to remove the smear layer.
Mix the required amount of cement. Working time is 2 min.
from the start of mixing at 23’C (73.4’ F).Higher temperatures
will shorten working time.
Remove surface moisture but DO NOT DESSICATE.
Transfer cement to the preparation using a syringe or suitable placement instrument. avoid air bubbles.
Form the contour, and place a matrix if required during the first 2 minutes of setting.
Setting time is 4 min. after start of mixing. Once set,
remove the matrix & immediately apply D-Tech’S varnish.
RESTORE GLASS is a truly economical restorative cement with
Restoration of primary teeth
Core build - up
Restorations of Class III ,V and limited Class I cavities.
The standard powder to liquid ratio is
2.8/1.0 g.1 level scoop of powder to 2 drops of liquid.
For accurate dispensing of powder, lightly tap the borle against the hand. Do not shake or invert.
Hold the liquid bottle vertically and squeeze gently.
Close bottle immediately after use.